Warranty Questions and How to Submit a Warranty Claim
Viance preservatives are backed by industry leading warranties. However, if you have any questions as to what is covered under your warranty, see product warranty infomation below. If you ever need to initiate a warranty claim, click on the link for warranty claim form.
The form will guide you to enter the following information listed below. Once completed, the form will automatically be sent to our Customer Service Department.
Be sure to have the following available to complete the form.
- Receipt from store purchased detailing lengths and quantities of wood purchased
- Photo of front and back of end tag(s) from the retailer where the material was purchased
- Photos of the material in question - close-up photo(s) and photo(s) from a distance showing the entire project
If you prefer, you can mail the claim form, receipt of purchase, and photographs to: Customer Service, Viance, 8001 BM Dr, Charlotte, NC 28262.
We will evaluate your claim upon receipt. Please keep in mind we may request additional information and/or photographs at a later date.
Deck Care FAQs
What do you recommend I use to clean my deck?
A diluted solution of soap and water with a stiff brush will remove mildew and dirt. Wash away the dirt with a hose or a very low setting (below 500 psi) on a pressure washer. The impact of water above a 500 psi setting on a pressure washer, as well as bleaches and oxidizers, can damage the wood fibers and are not recommended for deck cleaning. For tougher stains, use Oxalic acid-based (sometimes sold as wood bleach) deck cleaners. Never use household bleach or foaming cleaners as they can strip the preservatives and damage the wood fibers leaving an unnatural whitewashed appearance.
How do I clean dirt, debris and surface blemishes from my deck?
We recommend using a deck cleaning product formulated for this purpose available at home centers and hardware stores. For tougher stains, use Oxalic acid-based deck cleaners. Never use household bleach or foaming cleaners as they can strip the preservatives and damage the wood fibers leaving an unnatural whitewashed appearance. Pressure washers will work but can damage wood fibers if used incorrectly.
Can I use a pressure washer on my pressure-treated wood deck?
We recommend that the use of a pressure washer be limited to only the highly-experienced and/or professionals. Improper use can damage the wood surface and fibers. If you choose to use a power washer, use the lowest possible pressure setting (keep it under 500 psi) and fan tip only approximately 18 inches from the deck.
How do I get rid of the mold on my treated wood deck?
Mold that you find on pressure treated wood is not an indication of a fungal attack. Mold can grow on the surface of many products including wood (treated and untreated) due to exposure to moisture. To remove mold from your treated deck, use mild soap and water solution and a stiff brush.
Mold and mildew are present everywhere in our environment, both indoors and outdoors. Mold and mildew need four things to thrive: air, water, temperatures between 32 and 120°F, and a food source, conditions that are common wherever humans live, work, and play.
The best way to minimize mold and mildew growth is to control water and food sources. When it comes to mold or mildew on wood decking, water and organic matter are the primary conditions that enable mold and mildew colonies to thrive. To minimize these conditions, make sure water has the ability to flow away from the deck surface and areas surrounding the deck to lessen the absorption of water. Ensure there is adequate ventilation between deck boards and underneath the deck surface, so water can rapidly evaporate.
And since both mold and mildew feed on dead or decaying organic matter, so it is important to keep your deck clean of leaves and debris.
Cleaning Your Deck
To minimize mold on your decking, clean your deck as often as needed, at least twice each year. Climate conditions vary in different regions of the country and may necessitate more periodic cleaning.
Remove leaves, debris, and other organic materials that provide a food source for mold.
If mold is present, there are many commercial products available for cleaning mold. We recommend commercial cleaners containing oxalic acid. For best results, follow the manufacturer’s instructions and use cleaners within their stated shelf life. Do not mix recommended cleaning products together as harmful chemical reactions could occur. To maximize application coverage, remove excessive organic growth or clumps prior to applying the cleaner.
Coatings for High Mold-Prone Environments
For environments prone to high mold growth, there are commercially available coatings and finishes that seal the wood surface when applied and they should be maintained per the manufacturer’s instructions.
- Coatings should be applied within one week of cleaning for best results.
- Prior to coating, properly clean the decking, rinse thoroughly with water and hose and allow to dry completely.
- Sweep off any pollen and debris.
Tips for Minimizing Mold
- Maintain a deck that is dry and clean.
- Ensure gutters / down-spouts and dryer vents do not discharge directly on decks.
- Ensure adequate ventilation under and between decking boards.
- Minimize water puddles under decks and the use of wet mulch up against the deck structure.
- Cleaning a deck just after the last of the major pollen events (when your car doesn't change color from the pollen anymore) will minimize the seasonal outbreak of mold and mildew.
- Periodically rinse off your deck using a garden hose with a spray nozzle, especially after the major pollen events. Skilled professionals may use pressure washers with wide fan tips but in the wrong hands, your deck can be damaged. Exercise extreme caution when using pressure washers.
- Ensure the gaps between the decking boards remain free of debris so that regular rain showers can remove pollen and organic debris between cleanings.
- Avoid fertilizer over-spray.
Product Information & Specifications
- CSI 3-PART SPECS
ECOLIFE® / Severe Weather®
Ecolife (EL2) is DCOI or 4,5-dichloro-2-n-octyl-4-isothiazolin-3-1. A non-metallic, environmentally-advanced preservative, Ecolife was standardized by the AWPA for use in 2008 and is the only preservative standardized with an integrated water repellent. Benefits include 50% less cracking and straighter boards. Ecolife is also sold under the brand, Severe Weather at Lowe's.
ACQ is alkaline copper quaternary. Viance introduced this arsenic-free, water-based preservative in 1992, which replaced CCA when it was phased out for residential use in 2004. Preserve ACQ contains 100% recycled copper.
Preserve CA is copper azole and contains 100% recycled copper.
Designwood is a premium, long-lasting colorant that can be added to Preserve ACQ or CA to infuse color throughout the wood. This provides a finished project from the start with no need to initially stain. Saves a lot of time and money especially for decking, stairs, railing and balusters, bridges and fencing.
D-Blaze UL GreenGuard Gold Certificate of Compliance - UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings (includes California Department of Public Health standards for offices and classrooms)
Free Online CE Course
Ressources En Francais
TimberSaver is a water-borne borate treatment or DOT (disoldium octaborate tetrahydrate). Lower in toxicity, TimberSaver is used for interior treatments for sill plates, framing, furring strips, trusses, joists and sheathing, especially in areas of high termite risk.
SupaTimber is CCA (chromated copper arsenate), used in commercial, industrial and agricultural applications such as fences, posts, poles and marine facilities.
*SupaTimber CCA is manufactured and sold by Venator, LLC., and marketed by Viance under license.
ULTRAPOLE® NXT and ULTRAARM™ NXT
Ultrapole NXT and UltraArm NXT are formulated with the active ingredient DCOI, an environmentally advanced oil-borne preservative designed for wood utility poles and crossarms.
Moldex® 45 Mildewcide is an isothiazolinone compound for the temporary control of mold and mildew control treated wood building products. Moldex 45 is environmentally friendly and does not persist in the environment.
Moldex 45 Features and Benefits
- Liquid product
- Highly active microbiocide
- Low environmental toxicity
- Easy to incorporate
- Low dosage required, cost-effective
- Good supply and availability
- Global production capabilities
Moldex® 45 at a concentration in the range 220 ppm to 250 ppm of active ingredient is recommended for the control of mold in copper-azole (Viance CA-B,CA-C, and Pack PT) treating solutions.
Stable Formulation containing:
2-n-octyl-4-isothiazolin-3-one (45% by weight)
Appearance: Clear to slightly hazy liquid
Odor: Mild Specific gravity (20°C) 1.034
pH: (as supplied) 2.4
Viscosity: 40 cP
The active ingredient is not changed by short-term temperature stress during processing at up to 60°C. However, the product stability is affected by alkalinity and oxidizing agents in the treatment solution.
For best results, the treatment solution should be maintained at a pH of 8 or below; and the active level of MoldEX® 45 monitored and formulated as required to maintain the desired concentration.
Many factors such as temperature, air circulation, depth of penetration, moisture content, mildew and mold can affect the performance of the treatment. Therefore, the protection period can vary. Testing and experience from our technical experts will help you determine the solution for your treatment.